Created some tasks

main/Kconfig.projbuild

@@ -0,0 +1,14 @@
+menu "Project Configuration"
+    config WIFI_SSID
+        string "WiFi SSID"
+        default "myssid"
+        help
+            Network Name (SSID) of the WIFI to connect to.
+	    
+    config WIFI_PASSWORD
+        string "WiFi PASSWORD"
+        default "hunter2"
+        help
+            Password of the WiFi network to connect to.
+
+endmenu

main/main.c

@@ -4,40 +4,98 @@
  * License: GPLv3+
  */
 
+#include <stdbool.h>
 #include <stdio.h>
 #include "freertos/FreeRTOS.h"
+//#include "freertos/projdefs.h"
 #include "freertos/task.h"
 #include "dht22.h"
 #include "esp_log.h"
 #include "esp_wifi.h"
+#include "portmacro.h"
 
 static const char *TAG = "YASPAM";
 
-struct air_monitor_data {
+static EventGroupHandle_t s_monitor_event_group;
+
+static volatile bool run_dht = true;
+static volatile bool run_pms5003 = true;
+
 #ifdef CONFIG_DHT22_DATA_GPIO
-  deci_percent   dht22_relative_humidity;
-  deci_degrees_c dht22_temperature;
+  #define SENSOR_DHT22_BIT (1 << 0)
+#else
+  #define SENSOR_DHT22_BIT 0
 #endif /* CONFIG_DHT22_DATA_GPIO */
 
-#ifdef CONFIG_PMS5003_DATA_GPIO
-  // TODO
-#endif /* CONFIG_PMS5003_DATA_GPIO */
-  int64_t time; // TODO think about how best to store this.
-};
+#ifdef CONFIG_PMS5003_ENABLED
+  #define SENSOR_PMS5003_BIT (1 << 1)
+#else
+  #define SENSOR_PMS5003_BIT 0
+#endif /* CONFIG_PMS5003_ENABLED */
 
-void app_main(void)
-{
-#ifdef CONFIG_DHT22_DATA_GPIO
-  int ret = dht22_read();
-#endif /* CONFIG_DHT22_DATA_GPIO */
+#define SENSOR_ALL SENSOR_DHT22_BIT | SENSOR_PMS5003_BIT
 
-  
-  
-  for (int i = 10; i >= 0; i--) {
-      printf("Restarting in %d seconds...\n", i);
-      vTaskDelay(1000 / portTICK_PERIOD_MS);
+
+// TODO - figure out how to continually call this, maybe make a task for it?
+void save_measurements() {
+  EventBits_t bits = xEventGroupWaitBits(
+      s_monitor_event_group,
+      SENSOR_ALL,
+      pdFALSE,
+      pdFALSE,
+      portMAX_DELAY);
+  if (bits & SENSOR_DHT22_BIT) {
+    
+    deci_percent rh = dht22_relative_humidity();
+    deci_degrees_c temp = dht22_temperature();
+    // TODO - think about how to actually store this somewhere (for pushing and/or pulling)
+    //  and what sort of structures I could use
   }
-  printf("Restarting now.\n");
-  fflush(stdout);
+  if (bits & SENSOR_PMS5003_BIT) {
+    // TODO
+  }
+}
+
+void read_from_pms5003() {
+  while (run_pms5003) {
+      // Data reading is based on time spent high, so need to block interrups etc
+      portDISABLE_INTERRUPTS();
+      //int ret = pms5003_read();
+      portENABLE_INTERRUPTS();
+      ESP_LOGI(TAG, "Got PMS5003 data! Setting PMS bit now!");
+      xEventGroupSetBits(s_monitor_event_group, SENSOR_DHT22_BIT);
+      vTaskDelay(pdMS_TO_TICKS(1000)); // TODO: make this a config check
+  }
+}
+
+void read_from_dht22() {
+  while (run_dht) {
+      // Data reading is based on time spent high, so need to block interrups etc
+      portDISABLE_INTERRUPTS();
+      int ret = dht22_read();
+      portENABLE_INTERRUPTS();
+      ESP_LOGI(TAG, "Got DHT22 data! Setting DHT bit now!");
+      xEventGroupSetBits(s_monitor_event_group, SENSOR_DHT22_BIT);
+      vTaskDelay(pdMS_TO_TICKS(2000)); // TODO: make this a config check
+  }
+}
+
+
+void app_main(void) {
+  xTaskCreate(read_from_dht22,
+	      "READ DHT22",
+	      1024, // honestly I have _no_ idea
+	      NULL,
+	      5, // no idea either
+	      NULL); // will probably change this so that I can cancel the delay
+
+  xTaskCreate(read_from_pms5003,
+     "READ PMS5003",
+     1024, // honestly I have _no_ idea
+     NULL,
+     5, // no idea either
+     NULL); // will probably change this so that I can cancel the delay
+
+	      
   esp_restart();
 }